Kyocera Mita 1900N - B/W Laser Printer, Operation Manual

Page: 41 / 286

Paper Handling
1-27
Entering the Width and Length
Then, use the following procedure to set the paper size.
1
When the unit of measurement is set, press the key.
>>X Dimension
appears as shown below (the paper width setting).
2
Press the
ENTER
key. A blinking cursor ( ) appears.
3
Press the or key to increase or decrease the value of the figure
where the cursor is blinking and display the desired width. The
width can be set between
148
and
216
mm (
5.83
to
8.5
inches). You
can use the
>
and
<
keys to move the cursor right and left.
4
Display the paper width and press the
ENTER
key.
5
When the width is set, press the key.
>>Y Dimension
appears
(the paper length setting). Set the desired length in the same way as
the width. The length can be set between
210
and
356
mm (
8.27
to
14.02
inches).
6
Display the paper length, press the
ENTER
key.
Enter the paper size for
X Dimension
and
Y Dimension
as
shown in the figure.
X Dimension
Y Di
m
ens
ion
148 to 216 mm
(5.83 to 8.5 inches)
21
0 t
o
35
6 m
m
(8
.27
to 1
4
.0
2 in
ch
es
)
>>X Dimension
216 mm
>>X Dimension
216 mm