Chapter 7 WEB Management
- 53 -
Figure 7-37 DT-Ring configuration successfully
7.4.12
POE Configuration
Click the “POE Configuration” in the left menu and enter the page (as Figure 7-38),
select “Enable” or “Disable” for all ports. In the “Enable” state, POE function can work.
The output power consumption is 5W, 10W and 15W, which can be chosen according to
the power consumption of PD. Support function of voltage detection. Under the Enable
state of voltage detection, the power is automatically disconnected when the voltage
lowers than 22V or 28V. Web page shows output current, voltage, power consumption,
etc.
