SICOM3024SM Industrial Ethernet Switch User Manual
- 46 -
Figure 7-26 IGMP-SNOOPING
Figure 7-27 IGMP Snooping configure successfully
7.4.7
SNMP Configuration
Click the “SNMP Configuration” in the left menu and enter the page (as Figure 7-28),
enable SNMP and set read/read&write name, enter TRAP server IP address, TRAP port
no. and click “Apply” to finish configuration.
By SNMP configuration, the device only receive the message which name is line with the
setting name of read and read&write;
By setting the Trap IP address, device can selectively transmit TRAP message to those IP
addresses in the Trap IP address table;
By setting the Trap port number, EMS management server just receives TRAP messages
on those port numbers.
