Chapter 7 WEB Management
- 43 -
Figure 7-22 Port trunking sample
7.4.5
Static Multicasting Address Table
Click the “Static FDB Multicasting” in the left menu and enter the page (as Figure 7-23),
select “enabled” and click “Apply”, Add static multicasting MAC address, VLAN ID and
select port as shown in Figure 7-24, click “Apply”. When it is finished, click the “Static
Multicasting Address Table” in left menu, and see figure 7-25. To configure the
multicasting address, click Add and reset MAC address. To delete the mutlcasting
address, select the serial No. and delete.
Note: Before enabling static multicasting address table, “IGMP Snooping” must be
closed firstly.
