SICOM3024SM Industrial Ethernet Switch User Manual
- 18 -
Figure 3-8b STEP 2
POE Power input terminal (9.5mm)
The terminal of POE power input is 5 cores terminal (as Figure 3-9). 1 and 2 are positive
poles, 3 and 4 are negative poles, 5 is for grounding protection. Using POE should
connect power into the 5 cores terminal. RJ45 ports connect PD. The procedures of
5-core terminal power connection refer to the DC power input terminal connection.
+
-
+
-
Figure 3-9 9.5mm POE power input terminal
RS232 Network management interface
（
CONSOLE
）
The network management interface of SICOM3024SM is shielded RJ45 connector and
its interface communication standard is 3-wire RS232. Users can use a network
management cable with end bearing RJ45 plug and another end DB9F plug to connect
the network management interface of SICOM3024SM with the 9-pin serial port of the
control computer. Operating the local management software to set up SICOM3024SM
by CLI. The wiring sequence for network management interface of SICOM3024SM and
the 9-pin serial port of PC computer is shown in Figure 3-10.
