SICOM3024SM Industrial Ethernet Switch User Manual
- 50 -
“apply”.
Figure 7-33 RSTP configuration
7.4.11
DT-Ring Configuration
Click the “DT-Ring” in the left menu and enter the page (as Figure 7-34) to configure
redundant ring based on port or VLAN. Click “Add” to enter page (such as Figure 7-35
and Figure 7-36). Enter domain ID No. (ID=1~32
）
, domain name, set master or slave
station, select ring port (Module 1-4/FE1~FE6, 0/GE1~GE4). Additionally, there is
DT-Ring+ in this device, you can select this function and enable it, select standby port
and click “Apply”. Click ring name and see ring state in the DT-Ring page as Figure
7-37, see it as Figure 7-36.
Attention
：
Each ring only support one master, the others are slaves. The devices in one ring
have the same ring ID. The port with different ID No. can’t be in one ring network.
Redundant ring support DT-Ring. You can only configure ring based on port or
VLAN. One of ports on the master is in block state, the other is in transfer state. If
the port for transferring is blocked, the port in blocking state can be used as
Note: RSTP can not be used together with DT-Ring.
