SICOM3024SM Industrial Ethernet Switch User Manual
- 8 -
communication.
Configure Port Working Modes
SICOM3024SM is able to configure the working mode of all ports through
management: full/half duplex adaptive, 10M/half duplex, 100M/half duplex, 10M/full
duplex, 100M/full duplex, etc.
Configure Port Traffic Flow
You can configure the TX and RX rate of all ports via the management software of
SICOM3024SM. For port of 100Mbps, it can be set as 128K
、
256K
、
512K
、
1M
、
2M
、
10M
、
50M
、
100M. For Gigabit port, it can be set as 100M
、
500M
、
1000M.
Static Multicasting Communication
You can add multicasting users by adding static multicasting table manually. Compared
to dynamic multicasting, it is more simple, reliable and faster without protocols. You
can forward the multicasting data by configuring static multicasting forwarding tables.
Users can manually configure the multicasting communication according to their needs.
Static multicasting can not be used together with IGMP simultaneously.
IGMP
IGMP is Internet Group Multicast Protocol. SICOM3024SM series offers IGMP
monitor and query functions. Data packets can be transmitted to multiple necessary
host computers to prevent overloading. This solves the problems of occupied
bandwidth when broadcasting.
Broadcasting Storm Control
SICOM3024SM series offers broadcast storm protection ensuring the smooth
communication platform of the switch network. The switch will filter out the over flow
once the bandwidth of broadcast flow exceed the limit.
DT-Ring
DT-Ring is specially designed and developed by Kyland. It determines the state of ring
& port and ensures the redundant network won’t form ring by inspecting the ring port
state and less protocol messages. It make sure the Ethernet redundant ring is fast and
reliable to meet the high requirements of industrial communications.
DT-Ring+
