Chapter 5 Test methods
25
Chapter 5
Test methods
5.1
Self inspection
When electrify the equipment, all service indicator lights will flash one time, After 30
seconds, the RUN indicator will keep flashing, showing the devices work well.
5.2
TP Port Test
As shown in Figure 5-1, SICOM3024SM is powered on, connecting any two RJ45 ports
to two PCs by straight-through cable and send Ping command to each other, they can
both get command from each other without packet loss, The yellow light of the port
should be always on (PC work on 100M) or always off (PC work on 10M), the green
light should be blinking. In the same way, test all other RJ45 ports (Operations on PING
command is shown as the following example).
PC1
PC2
Figure 5-1 TP port test
5.3
POE Port Test
As shown in Figure 5-2, SICOM3024SM is powered on, connecting any two RJ45 ports
to uplink Ethernet ports of PD at two sides by cross-over or straight-through cable, and
connecting any RJ45 port of PD at two sides to the test computer, sending Ping
command to each other, they can both get command from each other without packet loss,
The corresponding yellow light of the port is always on, the corresponding green light is
blinking, showing the testing RJ45 ports run well. In the same way, test all other RJ45
