Chapter 7 WEB Management
- 39 -
7.4.1
Port Traffic Flow
Click the
“
Port Flow
”
in the left menu and enter the page (as Figure 7-14), where you
can configure the RX/TX speed of each port as the range of 128K
、
256K
、
512K
、
1M
、
2M
、
10M
、
50M
、
100M for 100Mbps port and 100M
、
500M
、
1000M for Gigabit port.
Click
“
Apply
”
to finish configuration.
Figure 7-14 Port Traffic Flow
7.4.2
VLAN
Click the “VLAN” in the left menu and enter the page (as Figure 7-15) and select “based
on 802.1Q” as VLAN mode, click “Add” to enter into the page as Figure 7-16. Enter
VLAN name, ID(VLAN1 is the default), select VLAN member, tag or untag, click
“Apply” to finish configuration.
Note: in the default state, VLAN ID is “1”, the range of ID no. is from 2 to 4093.
