Kval 965X, Operation Manual

Page: 55 / 104

Job Parameters and Task Section
2-25
965X Operation Manual
About the Cut Icons
Colored icons indicate the type of cut that is being processed.
There are three types icons displayed:
•
Yellow Dotted Line:
Represents a Dado Cut.
Always at the end of the jamb
•
White Dotted Line:
Represent s a Standard Cut.
(Hinge, Lock Plate)
•
Red Dotted Line:
Represents a Trim Cut.
Note:
The Trim Cut is always performed at the end
of the machine over the
Jamb Storage
shelf to
catch the refuse.
About the Process Box
Follow the cutting process by reading the text displayed in each Task Box.
• .
Pending:
Waiting for process to begin
•
Running:
Cutting is taking place, the Clock also signify that
the action is running.
•
Completed
: Cutting is completed for that shape.
•
Skipped
: See Figure 2- 10 .
About the Skip Cut Check Box
In an active group, clear the
Check Box
to skip that cutting process. In the figure below, the hinge
cuts numbers 2, 3, and 4 are skipped while Dado number 1 is the only cut to be made.
Note:
If the check box is cleared., the text
Skipped
will be displayed
Process Box.
FIGURE 2- 10.
Cleared Check Box