Kval 965X Operation Manual Download Page 28

Page: 28 / 104

How to Download the Service Application

1-20

965X Operation Manual

The interface of the

KVAL Support App

will be dis

played. Enter your name in the

Your Name

field.

The fields are described below:

Session code: An internal number to track this

machine. It is auto filled.

Allow Remote Control: Program is ready to allow

technicians to access machine computer

Your Name Field: Enter your name. The KVAL techni

cian will use this field to identify this machine.

Description: Enter machine Serial number and

issue.
Indicator: Green indicates there is a good connection

to the service center. If red, there could be an issue

with a LAN connection. Check the connections in the

plant.

After the

KVAL Support App

loaded and completed, call the

KVAL service center(1-800-553-

5825) and have the technician con

nect to the machine computer.

Click the

Allow

button to give the

KVAL

service technician permis

sion to access the operator station.

We are now ready to troubleshoot.

Summary of Contents for 965X









































































































Search results

Summary of Contents for 965X

Reviews:

Brands by name

Popular brands

Kval 965X, Operation Manual

Search results

Summary of Contents for 965X

Reviews:

Brands by name

Popular brands