![Kval 965X Operation Manual Download Page 83](http://html.mh-extra.com/html/kval/965x/965x_operation-manual_2012796083.webp)
Step 3: Calibrate the Tools
3-17
965X Operation Manual
• If the chisel cut is out of specification in the
width
of the jamb, the
Y-Axis
needs
to be adjusted.
• If the chisel cut depth is out of specification, the
Z-Axis
need to be adjusted.
Sample Calibration Chisels Cut
Check location and shape of the chisel cuts. figure shows the chisel locations.
• Look for stair step cut at the corners.
• Check depth of the corner cuts
• Use
Tool Config
to turn chisels on or off to isolate.
FIGURE 3- 10.
Chisel Locations
Figure 3- 11
shows the direction of the axis for each chisel location.
FIGURE 3- 11.
Chisel Reference Axis Direction
Upper Min Chisel
Lower Min Chisel
Lower Max Chisel
Upper Max Chisel
Lower Max Chisel
Upper Max Chisel
Lower Min Chisel
Upper Min Chisel
+
Z
-
Z
- Y
+X
- X
+ Y
Summary of Contents for 965X
Page 103: ......