Kval 965X Operation Manual Download Page 60

Page: 60 / 104

About the Tool Config Tabs

2-30

965X Operation Manual

Unlock the Tool Slot Configuration (Option)

Note:

The ability to lock and unlock

Tool Configure Menu

is a configurable

option

. At

customer request this option can be turned on or off.

The configuration screens are passwords protected. To unlock the screens, select the Unlock but

ton and enter the password in the password popup menu.

Note:

Always select the

Save

button after making changes to the

Tool Configuration

data. If not selected, the data will not be stored.

To Unlock

Select the

Unlock Button.

Enter Password in the Pop-Up

window.

Click

OK.

The

Unlock Button

will change to

Lock Button.

Tools can now be configured.

Configure and

Save

the data.

To Lock

Select the

Lock Button

and repeat

instruction above.

About Using Tool Configuration

Identify the tool that needs replacement.Mea

sure the dimensions and capture the data.

(Use this information to populate the

Drill or

Router

pop-up screens).

Select the

Tool Slot

3. E

nter the data into the pop-up screen

Summary of Contents for 965X









































































































Search results

Summary of Contents for 965X

Reviews:

Related manuals for 965X

Brands by name

Popular brands

Kval 965X, Operation Manual

Search results

Summary of Contents for 965X

Reviews:

Related manuals for 965X

Brands by name

Popular brands