Kval 965X, Operation Manual

Page: 47 / 104

Machine Controls Section
2-17
965X Operation Manual
About the Main Control Section
These section allows upper level control of the machine operations
Home Machine
This button starts the home sequence on the machine,
which scans to find a physical reference point on the
frame. When this point is found, the position is stored and
then used to calculate the location of all moves during the
machine process. The home sequence must be performed
every time the machine is powered up or reset.
Reset Machine
If a fault occurs that cannot be cleared, press the
Reset
Machine
button. This button will reset the machine to the
start position.
Important:
Press the
Home
button after resetting the
machine
Setup Mode On/Off
Select
Setup Mode
to toggle on or off. In the
On
mode, a
safe mode is active. The machine will go through normal sequences except the cutting
motors will be inactive. Use this mode to check the machine operation without making
a cut on the jamb. With the setup mode set to on, the button will change to an orange
background.
In the
Off
mode the machine is in normal operation.
Abort Job
Select to stop (abort) the process of the job that is currently running.
Park
Select the
Park
button to move the
Carriage Head
to the end of the machine. Perform at
the end of the work day, if machine is at rest, or during maintenance.