Job Parameters and Task Section
2-23
965X Operation Manual
About the Tasks Screen
The Task screen is a display of the processes that are performed on the jamb. Each task box deliv
-
ers a lot of information at a glance. The following information is available:
• The sequence of the cuts performed
• Color coded background to show the status of the cut.
• The ability to turn on or off the cutting of the shape.
• Color coded icons to identify the type of cut.
• A status box to display the action being performed.
• Location of the cut, either referenced from the
Jamb Stop
to the top of the cut or
Jamb Stop
to the center of the cut.
• The extent of the cut (length).
• Roll over to display
KvalCAM
job parameters.
Task Display to Jamb Cut Example
Relationship to the jamb cut and the task screen is displayed in the figure below. Match the
Task
Box
number to the number on the jamb illustration.
FIGURE 2- 7.
Task Display
Dado Cut
Trim Cut
Standard Cut
Standard Cut
Standard Cut
Standard Cut
Summary of Contents for 965X
Page 103: ......
