Jamb Support Blocks on the Vertical Jamb Clamp
4-10
965X Operation Manual
Safety
Light Curtain
The
Safety Light Curtain
provides safety for personnel who enter the defined area when the
machine is active. The Light Curtain is located at the front of the machine, see
Figure 4- 13 .
The
Safety Light Curtain
is composed of an emitter and receiver. The emitter has a row of synchro
-
nized light-emitting diodes (LEDs) that send signals to the receiver. The receivers have a match
-
ing row of synchronized photo detectors that read the signal from the emitter.
Important:
The system is aligned by trained technicians. Do not move the emitter or
receiver modules. This may cause misalignment, if the system is mis
-
aligned the machine will not start
FIGURE 4- 13.
Light Curtain Location
If the Beam is Broken
If the beam is broken during the cutting process, the machine will stop processing.
To Resume Normal Operation after an Beam is Broken
If a beam is broken, use the following procedure to recover.\
1.
Select the
Reset Machine
button on the operator's station
Main
screen.
Summary of Contents for 965X
Page 103: ......
