Master Mode
Guitar/Wind Controller Mode
11-5
that have decayed or have been released will disappear. When all 48 voices have been activated, the
display will show which voice channels are shut off (ÒstolenÓ) to enable new notes to play.
Press the
Done
soft button when you are Þnished with the Utility page. This is the same as pressing
the Exit button.
Sample
Press the
Sample
soft button to enter the K2vxÕs sampler. Refer to Chapter 15 for complete
information on the sampler.
Panic
This soft button sends an All Notes Off and All Controllers Off message to both the K2vx and over
all MIDI channels.
Reset
Press the
Reset
soft button if you want to return your K2vxÕs memory to the state it was in when
you bought it.
Caution!
The K2vx will ask you if you want to delete everything (meaning all RAM objects), and a
pair of Yes/No soft buttons will appear. Press No if you want to keep any objects you may not have
saved. Press Yes, and everything stored in RAM will be erased. All parameters will be restored to
default values. After a few seconds, the K2vx will return to the Program mode page.
Guitar/Wind Controller Mode
If you are using a wind controller or guitar controller with your K2vx, you may not always get the
sound you expect. Since these controllers will sometimes send a MIDI Note On command before
sending Breath or Volume data, the attack transients that characterize each instrument may be lost.
Therefore, the K2vx provides a special mode that may improve its response to your guitar or wind
controller. To enter Guitar/Wind Controller mode, press both Chan/Bank buttons while in Master
mode, then conÞrm with the
Yes
soft button.
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Enable|Guitar/Wind|controller|mode?|||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|||||||||||||||||||||||||||||
|||||
|
|||||
|||||||||||||||||||||||||||||
|Yes|
|
|No||
Guitar/Wind Controller mode slightly delays MIDI Note On and Note Off commands, so that
response to pitch bend and other expressive components of a note will be more accurate. If you are
hearing a "glitch" in the attack of notes from your guitar or wind controller, you should try setting
your K2vx to this mode. Keep in mind, however, that since this mode slightly changes the order in
which MIDI commands are sent, it may affect the performance of the K2vx under some
circumstances.
When you reboot the K2vx, it will reset Guitar/Wind Controller Mode to off.
Summary of Contents for K2500RS
