Kurzweil K2500RS, Musician'S Manual

Page: 124 / 530

MIDI Mode
The Soft Buttons in MIDI Mode
10-18
The Soft Buttons in MIDI Mode
The Þrst three soft buttons select the three MIDI mode pages. The PrgChg soft button lets you
send a program change command on any MIDI channel. The RsetCh soft button lets you return
all channel parameters to their default values. The Panic soft button sends an All Notes Off and
an All Controllers Off messages to the K2vx and on all 16 MIDI channels.
Program Change (PrgChg)
When you press this soft button, a dialog appears:
||||||||||||||||||||||||||||||||||||||||
Send|Program|Change:||||||||||||||||||||
||||||||||||||||||||||||||||
|||||| ||||||
On|Channel||1,|Send|Program| ||0||| ||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|||||| | |||||| | |||||| | |||||| | ||||| | ||||||
Chan-| | Chan+| | Prog-| | Prog+| | Send| | Cancel
This dialog lets you send program changes out the MIDI Out port, but does not change internal
programs.
The CHAN/BANK buttons, the Up/Down cursor buttons, and the Chan- and Chan+ soft
buttons can all be used to change the channel on which the program change command will be
sent. The Left/Right cursor buttons, the Plus/Minus buttons, the Alpha Wheel and the Prog-
and Prog+ soft buttons can all be used to change the program change number that will be sent.
When youÕve set the channel and the program change number, press the Send soft button to
send the program change command. Or press the Cancel soft button if you donÕt want to send
it.
You can change the channel and the program number as many times as you want before you
press
Send . You also can use the alphanumeric pad to select a program number directly.
Reset Channels (RsetCh)
When you press this soft button, the K2vx will ask you if you want to reset all channels, and a
pair of Yes/No soft buttons will appear. If you press the Yes soft button, all settings on the
CHANLS page will return to their default values. For example, you may have set several MIDI
channels to route their audio to Output Group B for a special project. When the projectÕs over,
you can reset the Channels to restore the audio routing to each individual program (a value of
Prog), rather than selecting each channelÕs page and setting the Pair parameter back to a value
of Prog. Press the No soft button if you decide not to reset the channels.
Panic
This soft button sends an All Notes Off and All Controllers Off message both to the K2vx and
over all MIDI channels.