manualshive.com logo in svg

Kurzweil Flash Play PC4, Musician'S Manual

Introducing the Kurzweil Flash Play PC4 - a powerful instrument designed for musicians seeking next-level performance. Enhance your musical journey with our comprehensive Musician's Manual, available for free download at manualshive.com. Unleash your creativity and unlock the full potential of the PC4 with this essential manual.

Share
Download
background image

Global Mode

MAIN1 Page

9-6

Sound Selection

The Category Buttons setting allows you to select Programs and Multis normally. 
The Enter Button setting allows you to scroll through the Program or Multi list without 

immediately loading the selected Program or Multi. This allows you to find the next Program 

or Multi to load without interrupting the Program or Multi that is currently being played. 

When scrolling through the Program or Multi list, Programs and Multis will appear with 

their names in parenthesis to indicate that they have not been loaded. Press the Enter button 

to load the currently selected Program or Multi. When switching to Program or Multi mode, 

the current Program or Multi will be loaded automatically. When pressing a Quick Access 

button, the assigned Program or Multi will be loaded automatically.

Show Zone Info

When this parameter is set to Yes, the Multi Mode selection page will show information for 

each of the Zones in the currently selected Multi.
The Multi select page will show information for 4, 8 or 16 Zones at a time, depending on the 

number of Zones in the selected Multi. If the selected Multi has 4 Zones or less, the Multi 

select page will show the information below. If the selected Multi has more than 4 Zones, 

some of this information will not be displayed.

•  Zone Solo status: The Solo icon turns white for any not soloed Zone. The Solo icon 

turns red for any soloed Zone.

•  Zone On status: The On icon turns white for any Zone that is not active (muted). 

The On icon turns green for any Zone that is active (not muted) if it has a MIDI 

destination which includes LOCAL. The On icon turns orange for any Zone that is 

active (not muted) if it has a MIDI destination which does not include LOCAL.

•  Zone MIDI Output status: The MIDI Output icon has a symbol for USB (on 

the left) and standard MIDI 5-pin DIN (on the right). This icon changes color 

depending on the MIDI destination of each Zone. If the Zone has no USB or MIDI 

output selected for Destination, the icon turns white. If the Zone has USB and/or 

MIDI selected for Destination, the corresponding left and/or right side of the icon 

turns green. 

•  Zone A B Audio Output setting: The A B Audio Output icon shows the Audio 

Output setting of each Zone. This icon corresponds with the Output parameter on 

the Multi Edit MAIN page. If Output is set to Auto, both sides of the icon (A and 

B) turn green. If Output is set to A, the left side of the icon (A) turns green, and the 

right side (B) turns white. If Output is set to B, the left side of the icon (A) turns 

white, and the right side (B) turns green. 

•  Zone Key Range: The Key Range icon shows an overview of the Key Range settings 

for each Zone.

Summary of Contents for Flash Play PC4
















































































































































































































































































































































Reviews:

No comments

Related manuals for Flash Play PC4

Ewent EW3162 Quick Install preview
EW3162
Brand: Ewent Pages: 2
Niko 10-901 Manual preview
10-901
Brand: Niko Pages: 24
Suunto foot pod User Manual preview
foot pod
Brand: Suunto Pages: 8
Pyle PKBRD4112 User Manual preview
PKBRD4112
Brand: Pyle Pages: 12
Classic Organ Works CMK-1 User Manual preview
CMK-1
Brand: Classic Organ Works Pages: 105
Chamberlain LiftMaster Professional 975LMC Owner'S Instructions preview
LiftMaster Professional 975LMC
Brand: Chamberlain Pages: 2
TYPHOON Gsmosphere TI001 User Manual preview
Gsmosphere TI001
Brand: TYPHOON Pages: 10
STEAMAX PROTANK 4 User Manual preview
PROTANK 4
Brand: STEAMAX Pages: 44
STEAMAX TFV8 X-BABY User Manual preview
TFV8 X-BABY
Brand: STEAMAX Pages: 87
Akai Professional LPK25 Service Manual preview
Professional LPK25
Brand: Akai Pages: 19
BELEDU BEL-KB560 User Manual preview
BEL-KB560
Brand: BELEDU Pages: 23
Franklin Bookman QBD-2067 User Manual preview
Bookman QBD-2067
Brand: Franklin Pages: 18
POSIFLEX KB-6600 Series Technical Manual preview
KB-6600 Series
Brand: POSIFLEX Pages: 36
ENHANCE SCORIA User Manual preview
SCORIA
Brand: ENHANCE Pages: 20
Connect2Car ANYWHERE GSM KIT Installation Manual preview
ANYWHERE GSM KIT
Brand: Connect2Car Pages: 28
ZALMAN Z-Machine ZM-K900M Manual preview
Z-Machine ZM-K900M
Brand: ZALMAN Pages: 16
GeoVision GV-Keyboard V3 User Manual preview
GV-Keyboard V3
Brand: GeoVision Pages: 58
Genesis R11 Quick Installation Manual preview
R11
Brand: Genesis Pages: 8

Brands by name

Popular brands

Load more brands