manualshive.com logo in svg

Kurzweil Flash Play PC4, Musician'S Manual

Introducing the Kurzweil Flash Play PC4 - a powerful instrument designed for musicians seeking next-level performance. Enhance your musical journey with our comprehensive Musician's Manual, available for free download at manualshive.com. Unleash your creativity and unlock the full potential of the PC4 with this essential manual.

Share
Download
background image

Multi Edit Mode

RIFF Page

7-33

To create a Multi with a single riff that plays multiple instrument parts, set Source Track to 

All. Each track of the song will play through the zones which have a corresponding MIDI 

channel. See 

“Channel” on page 7-7

 for details on the MIDI channel used for each Zone. 

Re-Channel

Song Track numbers and Multi Zone numbers have matching MIDI channel numbers by 

default. When the current zone’s MIDI channel and the channel of the riff’s selected Source 

Track do not match, it can make the riff play programs from other Zones. To prevent this 

you can use the Re-Channel parameter. 
When Re-Channel is set to On, the track selected for the Source Track parameter will play 

through the MIDI channel of the current zone. For example, if you want to use a riff on zone 

2 (set to use MIDI channel 2) and the riff was recorded on track 4 (set to use MIDI channel 

4), you will need to turn Re-Channel on. If you were to do this and keep Re-Channel set to 

Off, the riff would play using the program from zone 4 (set to channel 4) instead of zone 2. 
When Re-Channel is set to On and Source Track is set to All, all of the tracks of the song 

will play through the MIDI channel of the current zone.

Trigger Range

Use the Trigger Range parameters to set the keyboard range that will trigger the Riff. The 

left and right Trigger Range parameters set the lowest and highest keys that will trigger the 

Riff. For a key to trigger a riff, the key must also be within the Zone’s Key Range (set on the 

Overview page). 
You can select a key using the Alpha Wheel, plus/minus buttons, or by pressing and holding 

the Enter button and pressing the desired key. 
Note:

 Riffs can also be triggered and released by assigning a controller destination 163 Riff 

OnOff

.

Release Range

Use the Release Range parameters to set the keyboard range that will stop the Riff when a 

key is released. The left and right Release Range parameters set the lowest and highest keys 

that will stop the Riff when a key is released. For a key to stop a riff, the key must also be 

within the Zone’s Key Range (set on the Overview page). 
You can select a key using the Alpha Wheel, plus/minus buttons, or by pressing and holding 

the Enter button and pressing the desired key. 
Note:

 Riffs can also be triggered and released by assigning a controller destination 163 Riff 

OnOff

.

Summary of Contents for Flash Play PC4
















































































































































































































































































































































Reviews:

No comments

Related manuals for Flash Play PC4

Cadillac Escalade 2016 Convenience/Personalization Manual preview
Escalade 2016
Brand: Cadillac Pages: 20
Generalmusic GEM GK 340 Owner'S Manual preview
GEM GK 340
Brand: Generalmusic Pages: 24
M-Audio Oxygen 88 User Manual preview
Oxygen 88
Brand: M-Audio Pages: 51
Asus GK1050 User Manual preview
GK1050
Brand: Asus Pages: 21
Asus EeeKeyboard PC EK1542 User Manual preview
EeeKeyboard PC EK1542
Brand: Asus Pages: 48
Motorola BLUETOOTH KEYBOARD Manual preview
BLUETOOTH KEYBOARD
Brand: Motorola Pages: 80
Motorola iDEN Keyboard Mini 32K User Manual preview
iDEN Keyboard Mini 32K
Brand: Motorola Pages: 22
Motorola KZ450 Wireless Keyboard w Device Stand Getting Started Manual preview
KZ450 Wireless Keyboard w Device Stand
Brand: Motorola Pages: 76
Motorola AlphaMate II Operator'S Manual preview
AlphaMate II
Brand: Motorola Pages: 27
Motorola KZ500 Wireless Keyboard with Trackpad Manual preview
KZ500 Wireless Keyboard with Trackpad
Brand: Motorola Pages: 76
Motorola HMSC7075 Quick Start Manual preview
HMSC7075
Brand: Motorola Pages: 10
PROEL BM0900 Manual preview
BM0900
Brand: PROEL Pages: 54
Natec DOLPHIN User Manual preview
DOLPHIN
Brand: Natec Pages: 18
Franklin Deutsch/Englisch Professor DBD-470 User Manual preview
Deutsch/Englisch Professor DBD-470
Brand: Franklin Pages: 36
Garmin BC 50 Owner'S Manual preview
BC 50
Brand: Garmin Pages: 10
Fomis TP4-022 Quick Start Manual preview
TP4-022
Brand: Fomis Pages: 6
Targus PA760U User Manual preview
PA760U
Brand: Targus Pages: 21
Yamaha Portatone PSR-540 (Spanish) Manual De Instrucciones preview
Portatone PSR-540
Brand: Yamaha Pages: 161

Brands by name

Popular brands

Load more brands