Kurzweil Flash Play PC4 Musician'S Manual Download Page 143

Page: 143 / 335

Program Edit Mode

KB3 Editor: Navigation

3-107

The Classic B-3. For this sound, choose 79 tone wheels and set the low note to be C 2. The

best settings here are the Bright Wheel Volume Map and Peck’s Organ Map. You may also

want to reduce the Key Click level.

KB3 Editor: Navigation

Navigation in the KB3 Editor is similar to navigation in the VAST Editor. Unlike the VAST

Editor the KB3 editor does not have layers. See

Navigation on page 3-4

for details.

KB3 Editor: The Parameters (PARAMS) Page

The Parameters page in the KB3 Editor is similar to the Parameters page in the VAST Editor.

See

The PARAMS Page on page 3-6

for details.

In the KB3 Editor, the Parameters page contains some parameters which do not appear on

any other page: Rotary Slow/Fast, Rotary Brake, Chorus/Vibrato On/Off, Chorus/Vibrato

Select, and Chorus/Vibrato Depth.

KB3 Editor: The Program FX (FX) Page

This page is the same as the VAST Program editor FX page (see

The FX Page on page 3-13

KB3 Editor: The COMMON Page

The Common page in the KB3 Editor is similar to the Common page in the VAST Editor.

See

The COMMON Page on page 3-17

for details.

In the KB3 Editor, the Common Page contains common organ emulation parameters (in

addition to the VAST Editor Common Page parameters).

Summary of Contents for Flash Play PC4
















































































































































































































































































































































Search results

Summary of Contents for Flash Play PC4

Reviews:

Related manuals for Flash Play PC4

Brands by name

Popular brands

Kurzweil Flash Play PC4, Musician'S Manual

Search results

Summary of Contents for Flash Play PC4

Reviews:

Related manuals for Flash Play PC4

Brands by name

Popular brands