Program Edit Mode
FM Alt Input Page
3-103
DepthCtl
Use the DepthCtl parameter to modulate the Source 2 modulation depth with a physical
controller or other control source.
When a DepthCtl control source is at its minimum value, the Source 2 modulation depth
will be set to the value of the MinDpth parameter.
When a DepthCtl control source is at its maximum value, the Source 2 modulation depth
will be set to the value of the MaxDpth parameter.
DepthCtl control source values between the minimum and maximum will scale the Source 2
modulation depth between the values of the MinDpth and MaxDpth parameters.
MinDpth
Use the MinDpth parameter to set the minimum modulation depth of Source 2.
When a DepthCtl control source is at its minimum value, Source 2 will apply the amount of
modulation set by the MinDpth parameter.
MaxDpth
Use the MaxDpth parameter to set the maximum modulation depth of Source 2.
When a DepthCtl control source is at its maximum value, Source 2 will apply the amount of
modulation set by the MaxDpth parameter.
Keymap Pitch Parameters
Adjust
Use the Adjust parameter to adjust the pitch of the Keymap in half steps.
Vel Track
Use the Vel Track parameter to modulate the pitch of each note of the Keymap based on the
MIDI velocity of each note played.
Positive Vel Track values will progressively increase the pitch for higher velocities. For
example, with a positive Vel Track value, playing a velocity of 0 causes no change in pitch,
playing each velocity further above 0 increases the pitch by the Vel Track amount.
Fine
Use the Fine parameter to adjust the pitch of the Keymap in cents.
Fine Hz
Use the Adjust parameter to adjust the pitch of the Keymap in Hertz.
Summary of Contents for Flash Play PC4
Page 1: ... It s the sound Part Number 910587 002 Rev B ...
Page 9: ... ix MIDI Implementation A 1 Specifications B 1 Index I 1 ...
Page 289: ... 8 40 ...
Page 328: ... 10 7 ...