Function description
6.2.2
Manually replacing a soldering tip
CAUTION
Risk of burns! The soldering iron gets hot immediately after it is switched on!
Never touch the hot soldering tip or the hot heating element directly!
CAUTION
Attention Risk of burns!
After switching off, the soldering tip remains hot for a long time!
Always touch only the knurled plastic part! ([2] in Figure 17)
To prevent any material damage due to overheating, switch off the heating ele-
ment or the soldering station before each soldering tip replacement! Never oper-
ate the soldering iron without the soldering tip!
Heating element immediate switch-off
a) Double tap the soldering iron to turn off the heating element. While tapping,
tilt the soldering iron slightly upwards (see Fig. 18).
Fig. 18: Double tap the soldering iron
ð
The READY LED is pulsing blue, which means that the heating element is
off.
b) Alternatively, use the On/Off switch to turn off the soldering station.
Ersa GmbH
3BA00252-01 | Rev. 1
34
Summary of Contents for i-CON TRACE
Page 2: ......
