Function description
Picking up a soldering tip
Fig. 16: A soldering tip can be picked up in four steps
a) Figure 16 on the left: Insert the heating element all the way into the soldering
tip [1], then turn the soldering iron clockwise as far as it will go [2].
b) Figure 16 on the right: Turn the soldering iron slightly towards you [3] and pull
it out [4].
Fig. 17: Soldering
tip proper mount-
ing
c) To check the soldering tip for tight seating:
Keep a correct distance between the knurled sleeve [2] and the soldering iron
[3], as shown in Fig. 17.
The bayonet mount of the knurled sleeve is completely locked.
The display panels [1] do not touch the knurled sleeve [2].
d) After changing the soldering tip, tap the slightly upwardly inclined soldering
iron twice to switch the heating element or the soldering station back on
again.
ð
The READY LED is no longer pulsing blue.
Ersa GmbH
3BA00252-01 | Rev. 1
33
Summary of Contents for i-CON TRACE
Page 2: ......
