Service and maintenance
7.3
Cleaning and Maintenance
Info: There are no user-serviceable parts inside the soldering station.
CAUTION
Danger of electric shock!
Before cleaning, de-energise the soldering station by pulling out the mains plug!
CAUTION
Attention Risk of burns!
After switching off, the soldering tip remains hot for a long time!
Cleaning
a) Occasionally clean the device with a soft, damp cloth. Do not use abrasive
sponges, scouring agents, solvents such as alcohol or gasoline, steam or high-
pressure cleaners.
b) Wipe dust deposits from the ventilation openings dry.
c) The supporting stand can be opened so that it can be cleaned inside.
Fig. 26: Opening the supporting stand
Maintenance work
a) Always leave a small amount of solder on the soldering tip after soldering, in
order to extend its service life. An untinned soldering tip becomes passive
within a short time.
Ersa GmbH
3BA00252-01 | Rev. 1
42
Summary of Contents for i-CON TRACE
Page 2: ......
