Function description
Fig. 21: Fit the soldering tip [1], overcome the spring force and lock the bayonet mount [2]
Fig. 22: Soldering
tip proper mount-
ing
a) To check the soldering tip for tight seating:
Keep a correct distance between the knurled sleeve [2] and the soldering iron
[3], as shown in Fig. 22.
The bayonet mount of the knurled sleeve is completely locked.
The display panels [1] do not touch the knurled sleeve [2].
b) After changing the soldering tip, tap the slightly upwardly inclined soldering
iron twice to switch the heating element and/or the soldering station back on
again.
ð
The READY LED is no longer pulsing blue.
Ersa GmbH
3BA00252-01 | Rev. 1
36
Summary of Contents for i-CON TRACE
Page 2: ......
