Service and maintenance
7.2
Error treatment
In case of faulty operation of the soldering station, check the following items:
a) Soldering iron does not get hot.
Is the soldering iron connected correctly to the soldering station?
b) Soldering station remains off after switch-on / no line voltage?
Correctly connect the mains cable to the soldering station and socket. For this
purpose, follow the electrical specifications on the type plate.
c) Soldering station remains off after switching on.
Is the fuse defective?
When using the soldering station in the LAN network, the connection can be inter-
rupted by strong electromagnetic fields, e.g. during storms or technical equipment
in close proximity. Switch the soldering station off and on again to re-establish the
connection.
7.2.1
Replacing the fuse
a) Switch off the soldering station and disconnect the mains plug from it.
CAUTION
Danger of electric shock!
Before changing the fuse, disconnect the soldering station from the mains by
pulling out the mains plug!
a) Carefully pry open the fuse compartment under the mains connection, e.g.
with a flat-blade screwdriver (see Fig. 23).
Ersa GmbH
3BA00252-01 | Rev. 1
38
Summary of Contents for i-CON TRACE
Page 2: ......
