Kurtz Ersa i-CON TRACE, Operating Instructions Manual

Page: 30 / 46

Function description
6. Function description
6.1 Information on the LED indicators
ONLINE LED signals
Blue The soldering station is waiting for the Bluetooth connec-
tion to be established through the “Ersa TRACE” app for in-
tegration into the WLAN network
Yellow Network alright, no connection to the “Ersa TRACE Cockpit“
web app
Green Network connection established
Red No network connection / connection error
READY LED signals
Green Soldering is possible
Red Soldering tip temperature outside the set temperature
range
Yellow Standby mode, temperature is lowered
Pulsing yellow Sleep mode, heating element is switched off
Pulsing blue The heating element is switched off by tapping the solder-
ing iron twice, e.g. to replace the soldering tip
SERVICE LED signals
Green All functions running properly
Yellow No tool connected
Red Incorrect tool connected or error message in the “Ersa
TRACE Cockpit” web app
Other LED signals
All 3 LEDs yellow The Reset button was pressed. The soldering station is set
to the factory settings
All 3 LEDs pulsing yellow Firmware update in progress
Ersa GmbH 3BA00252-01 | Rev. 1 30