KTM 690 Enduro R 2018, Repair Manual

Page: 89 / 311

Info
A loose
spoke
can cause
wheel
imbalance,
which leads to
more
loose
spokes
in
a
short time.
If the
spokes
are
too
tight, they
can
break
due to local overload.
Check the spoke tension regularly, especially
on a new
motorcycle.
400998-01
13.6.1
Removing
the front
wheel
“
$02202-10
$00643-10
—
Check the axial run-out and radial run-out of the rim.
Axial run-out
outside of the rim
joint
|
<
1.8
mm
(< 0.071 in)
Radial
run-out
outside of the rim
joint
<
1.8
mm
(<
0.071
in)
»
|f the measured value is greater than the
specified
value:
—
Center the rim.
e
=
Info
i
Center the rim
by tightening
the
spoke nipple
on
the
opposite
side of the rim run-out.
Change
the rim if it is
excessively
deformed.
—
Correct the
spoke
tension.
Preparatory work
—
Raise the motorcycle with
a
lift stand. (~~
p.
12)
Main work
—
Press the brake
caliper
onto
the brake disc
by
hand in order to
push
back the brake
pistons.
e
Info
Make
sure
when
pushing
back the brake
pistons
that
you
do
not
press the brake
caliper against
the
spokes.
—
Remove
screw
@
and pull wheel speed
sensor
@e
out
of the
hole.
—
Loosen
screw
@
byseveral
rotations.
—
Loosen
screws
@.
—
Press
on screw
eo
to
push
the wheel
spindle
out
of the axle
clamp.
—
Remove
screw
@.
87