KTM 690 Enduro R 2018, Repair Manual

Page: 139 / 311

G00769-10
GOO768-11
Removethe floor jack with the special
tool.
|
Floor
jack
attachment (75029055000) ("=
p.
292)
Position the
engine
bearer.
Mount and
tighten
screws
@.
Guideline
Screw, engine
bearer
|
M10 45 Nm (33.2 Ibf ft)
on
frame
Mountand
tighten fitting
@.
Guideline
Engine carrying
|
M10 45 Nm (33.2 Ibf ft)
screw
Loctite®243TM
Tighten
the
swingarm pivot.
Guideline
Screw, swingarm
M12 80 Nm (59 Ibf ft)
pivot
Tighten
the lower
engine
bracket.
Guideline
Engine carrying
|
M10 45 Nm (33.2 Ibf ft)
screw
Loctite®°243TM
Position the line with the oil pressure
sensor.
Mount and
tighten
connection
@.
Guideline
Oil
pressure
sensor
M10x1 10 Nm
(7.4
Ibf
ft)
line
Position the clamp
of
the oil line. Mount and
tighten
screw
@.
Plug
in the
connector.
Guideline
Remaining
screws,
M6 10 Nm (7.4 Ibf ft)
chassis
Position the hoses of the
engine
breather, the SAS, and the
oil
return
line. Mount
spring
band
clamp
©
using
the
special
tool.
|
Spring
band clamps
plier
(60029057100) (—"
p.
286)
137