KTM 690 Enduro R 2018, Repair Manual

Page: 142 / 311

Position the radiator hoses. Mount hose clips
@.
Hose clamp
plier
(60029057000)("=
p.
286)
Install the manifold.
(<=
p.
65)
Install the air filter box. (~—
p.
70)
Disconnect the battery. (<=
p.
101)
Remove the
oil filler plug with O-ring
@
from
the
clutch
cover
and
fill up with
engine
oil.
Engine
oil 1.70 |
Engine
oil
(1.8 qt.) (SAE 10W/60)
(00062010035)
(">
p.
278)
Engine
oil
Engine
oil
Alternative
engine
oil (SAE 1OW/50)
(=
p.
279)
Mount and
tighten
thefiller
plug
with
O-ring
@.
Finishing
work
Fill/bleed the
cooling
system. ('—
p.
218)
Remove the
motorcycle
from the work stand. (""
p.
13)
Perform theinitialization
run.
(""
p.
236)
Go for
a
short test ride.
Read out the fault memory
using
the KTM
diagnostics
tool.
Check the engine for leak tightness.
Check the
engine
oil level. (©
p.
225)
Checkthe coolant level. (©
p.
221)
Mount the
seat.
(°"
p.
73)
17.3.1
Clamping
the
engine
into
the
engine
assembly stand
305506-10
Mount special tool
QD
on
engine assembly stand
Qe.
Engine
work stand (61229001000)(""
p.
287)
Fitting for work stand (75012001060) (©"
p.
288)
Holder for
engine
motor stand (75012001070) (—
p.
288)
Mountthe
engine
on
special
tool
@.
e
Info
Have
an
assistant
help
you
or use a crane.
140