KTM 690 Enduro R 2018, Repair Manual

Page: 182 / 311

17.4.31
Preassembling
the
antihopping
clutch
—
Thoroughly
oil the clutch
facing
discs.
—
Push the support
ring
od
and the
pretension ring
@
on
to the
outer
clutch hub.
e
Info
The
pretension ring
must
be installed
so
that it is flush
with the inner
edge
®
on
the
support
ring.
-
Position the trimmed clutch
facing
disc with the
recess
for the
pretension ring
on
the
outer
clutch hub.
—
Beginning with
the coated
intermediate
clutch
disc, position
all further clutch
facing
discs and intermediate clutch discs
alternately.
—
Position
the release
springs
©.
—
Push
on
the
outer
clutch hub
Qo
and pay attention to the
markings.
“
The
arrow
©
of the outer clutch hub must
point
to the
notch
@
of
the
inner clutch hub.
-
Push the
two
clutch hubs
firmly together
and have
an
assistant
screw
in the special tool.
|
Assembly
screws
(75029033000)(©*
p.
289)
~
300125-10
|
300125-10
|
Info
®
|
Apply the
special
tool with the hand only, do
not
use
anothertool.
Apply
the
special
tool
only firmly
enough
so
that the
clutch
facing
discs
can
still be turned
against
each
other
since
they
still
have to be
aligned
for mounting
in the clutch basket.
180