KTM 690 Enduro R 2018, Repair Manual

Page: 216 / 311

_
Warning
'
Skin irritation Brake fluid
causes
skin irritation.
Keep
brake fluid
out
of
the reach of
children.
Wearsuitable protective
clothing
and safety
glasses.
Do
not
allow brake fluid
to
come
into
contact
with the skin,
the eyes
or
clothing.
Consult
a
doctor
immediately
if brake fluid has
been swallowed.
Rinse the affected
area
with
plenty
of
water in
the event of contact with the skin.
Rinse
eyes
thoroughly
with
water
immediately
and consult
a
doctor if brake fluid
comes
into
contact
with the eyes.
If brake fluid spills
on
to your
clothing,change
the
clothing.
Warning
Environmental
hazard Hazardous substances
cause
environmental damage.
Dispose
of oils,
grease,
filters, fuel,
cleaning
agents, brake fluid,
etc.,
correctly
and in
compliance
with
the
applicable regulations.
Info
Never
use
DOT 5 brakefluid. It is silicone-based and
purple
in color. Oil seals and clutch lines
are
not
designed
for DOT 5 brakefluid.
Avoid contact between brake fluid and
painted
parts. Brake fluid attacks
paint.
Only
use
clean brake fluid from
a
sealed container.
202086-10
Move the clutch fluid reservoir mounted
on
the handlebar to
a
horizontal
position.
Remove
screws
@.
Remove
cover
co)
with membrane
©.
Fill
bleeding syringe
@
with the
appropriate hydraulic
fluid.
Syringe
(50329050000) (=2
p.
284)
Brake fluid DOT 4 / DOT 5.1 (©
p.
278)
On the clutch slave
cylinder,
remove
bleeder
screw
86
and
mount
bleeding syringe
43
Inject the liquid into
the system
until it
escapes
from drill
hole
6
of the master
cylinder
without bubbles.
Drain fluid
occasionally
from the master
cylinder reservoir,
to
prevent overflow.
Remove the
bleeding
syringe. Mount and
tighten
screws
bleeder
screw.
Correct the fluid level of the
hydraulic
clutch.
Guideline
Fluid level below container 4
mm
(0.16
in)
nim
Position the
cover
with the membrane. Mount and
tighten
the
screws.
214