KTM 690 Enduro R 2018, Repair Manual

Page: 127 / 311

16.1.1
Setting
the kilometers
or
miles
e
Info
If
the
unit is changed,
the value
is retained and converted accordingly.
Makethe
setting according
to
the country.
Condition
The motorcycle is
stationary.
-
Switch
on
the
ignition by turning
the
ignition key
to
position
ON
©.
—
Press the MODE button
repeatedly
until the ODO
display
mode
kmihy
is active.
—
Keep
the MODE button
pressed
until the
display
mode
changes
IFOE .0AE (FAG
from kn/h to
mph
or
from
mph
to km/h.
Guideline
Activation duration of
10s
400839-01
MODE
button
16.1.2
Setting
the clock
Condition
The
motorcycle
is
stationary.
-
Switch
on
the
ignition
by
turning
the
ignition key
to
position
ON
©.
-
Press the MODE button
repeatedly
until the ODO modeis active.
ae
‘kash
—
Keep
the
MODE button and the SET button pressed simultane-
ously.
(FOE
coo
HF
(JAE
&“
The time
display begins
to flash.
—
Press
the
MODE
button to set the hour.
-
Press the SET button to set the minute.
401444-01
||
—
Keep
the MODE button and the SET button
pressed
simultane-
ously.
” Thetimeis set.
16.1.3
Setting/resetting display
TRIP 1
e
Info
The TRIP 1
trip
counter
runs
constantly
and counts up to
999.9.
The
trip
counter
can
be used to
measure
the distance
covered
during trips
or
between two
refueling
stops.
After the value 999.9 is reached, the trip
counter
starts
at
0.0
again.
125