KTM 690 Enduro R 2018, Repair Manual

Page: 53 / 311

—
Remove
supporting plate
@
and rebound shim stack
@
together
with
piston
@.
e
Info
Thread the rebound shim set
on a
screwdriver and set
the parts
down together.
—
Remove compression shim
stack
6
with supporting plate
6.
e
Info
Thread the
compression
shim stack
on a
screwdriver
and set
the parts
down
together.
200572-11
—
Remove
seal
ring
retainer
@.
—
Remove
locking
cap
@
and
rubber buffer
©.
Condition
The
damper
has been disassembled.
—
Measure the inside diameter at both ends
and
in the
center
of
the
damper
cartridge.
Dampercartridge
Diameter 46.10
mm
(1.815 in)
»
|f the measured value is greater than the
specified
value:
—
Change
the damper
cartridge.
-—
Check the
dampercartridge
for
damage
and
wear.
201280-10
»
|f there is
damage
or wear:
—
Change
the dampercartridge.
51