KTM 125 SX 2010, Owner'S Manual

Page: 839 / 899

On pressure with nitrogen
– Nitrogen filling gauge T14.019
1
.
– Remove the protecting cap
2
of the needle
3
.
– Place the needle in the center of the filling hole
4
of the screw-cap
and push the needle completely through the rubber plug!
– Adjust the nitrogen pressure to 1.0 - 1.1 bar (up to model 2006)
and 1.2 bar (from model 2007 on).
– Push the piston rod inside the tube! Then when the piston rod is
fully extend by it self remove the charging device out the rubber
plug and close the tap of the device!
– Place the seal in the screw-cap or on the Allen bolt.
5
.
4-74
Repair manual WP Fork “Closed Cartridge”
Art.No.: 3.211.199-E
1
2
3
4
5