KTM 125 SX 2010, Owner'S Manual

Page: 626 / 899

Filling procedure using the external tank
– Remove the lid of the external tank and connect the damper to the
quick release connecter under the lid.
– The hook can be placed on several places on the lid, you might have
to move the hook to another position in order to hang up a certain
damper.
– Hang the damper on the hook under the lid.
– Lower the damper into the external tank, be careful not to damage
the top of the cylinder as this is the place where the seal works.
Damaging the top of the cylinder may result in leakage, when this
occurs the vacuum-filling device will no longer function. Carefully
guide the hose into the external tank to avoid kink of the hose.
– Put the lid on the external tank and apply a light pressure to the lid.
The external tank should be used in the upright position, and the
tank should always be placed lower than the vacuum filling unit.
– Tighten both wing nuts slightly
– And you also need to connect the damper connection to the external
tank.
– Now the vacuum filling unit has to be connected to the external
tank, this means connecting the connection hose external tank.
4-14