KTM 125 SX 2010, Owner'S Manual

Page: 601 / 899

– Grease the groove of the adaptor with T 158.
– Assemble the O-ring
1
.
– Grease the inside lip of the dirt scraper
2
with T 625.
– Put special tool T 1215 onto the piston rod.
– Slide carefully the adaptor
3
over the tool on the piston rod.
Checking the parts
– Inspect the surface of the rebound disc.
– If necessarry polish the surface of the rebound disc with sandpaper
600 on a flat plate.
– Always check the first shim that is assembled on the piston if it is
not bended. If bended check the second shim and so on.
– Disassemble the piston ring and the O-ring of the piston.
– Inspect the surface of the piston ring.
– Replace the piston ring when you see through the surface a bronze
color. Also replace the piston ring if the surface is feeling rough. The
best way to do this is to compare it with a new one!
3-32
W
orkshop Manual WP 5018 DCC with SXS/SMR
Art.Nr
.: 3.211.208-E
1
2
3