KTM 125 SX 2010, Owner'S Manual

Page: 629 / 899

– When the pressure gauge reaches 0 bar, the lever Oil reservoir can
be moved to Vacuum and the lever External tank must be moved to
Open position, this will start the 2nd cycle of vacuum.
External tank Open
Damper Vacuum
Oil reservoir Vacuum
– Now you will see the pressure gauge moving to a negative pressure,
as soon as the pressure reaches 25 mbar the vacuum gauge will also
start moving to a lower pressure. As soon as the vacuum gauge
reaches the specified pressure (2nd cycle), in this example 8 mbar,
the lever Oil reservoir should be moved to Equalize pressure.
External tank Open
Damper Vacuum
Oil reservoir Equalize pressure
– When the pressure gauge has reached 0 bar, the lever Damper can
be moved to Pressure.
External tank Open
Damper Pressure
Oil reservoir Equalize pressure
– This will start the forcing of oil into the damper, you will see the
pressure gauge move to the pressure that has been set earlier, in
this case 3 bar. As soon as the pressure has been reached the lever
Damper can be moved to the Vacuum position.
External tank Open
Damper Vacuum
Oil reservoir Equalize pressure
– This will release the pressure and the pressure gauge will move back
to 0 bar.
– As soon as the pressure gauge reaches 0 bar, the main power switch
can be turned off. This ends the vacuum filling process.
! CAUTION !
T
HE LID OF THE EXTERNAL TANK CAN BE REMOVED
(
LEAVE THE HOSES CONNECTED
)
AND THE SEPARATION PISTON SHOULD BE PRESSED INTO THE CORRECT POSITION
USING TOOL
T107S. T
HE DAMPER CAN NOW BE DISCONNECTED FROM THE
VACUUM
-
FILLING DEVICE
. T
HE FILLING ADAPTOR CAN BE REMOVED
,
SOME OIL MAY
LEAK WHEN YOU ARE REMOVING THE FILLING ADAPTOR
.
4-17