Maintenance
283
Pos: 52.64.30 /Ü berschriften/Ü berschriften 3/P-T /S/Sensor B30 M esser kontr olle ( bei Ausführung "Schnei dwer k MC") @ 397\mod_1447141620984_78.docx @ 2823597 @ 3 @ 1
16.10.6
Sensor B30 Blade Monitoring (for version with “Cutting unit MC”)
Pos: 52.64.31 /BA/Wartung/Sensoren/Sensor B30 M esser kontr olle_Forti ma @ 397\mod_1447141879926_78.docx @ 2823658 @ @ 1
2
1
a
3
RB-4-004
Fig. 241
The sensor “Blade monitoring” (B30) (1) is located on right-hand machine on the blade control
shaft.
• Loosen counter nut (2).
• Set the sensor (1) at a distance of
a=2 mm
to the lever (3) (lever swivelled up).
• Tighten counter nut (2).
The height of the sensor (1) can also be adjusted. Set the sensor so that it is detected as alive
in the sensor test.
Pos: 52.64.32 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
