Maintenance
267
Pos: 52.22 /Ü berschriften/Ü berschriften 3/P-T/S/Schnei dmesser der N etzbindeei nrichtung ei nstellen @ 333\mod_1429101678503_78.docx @ 2545527 @ 2 @ 1
16.4
Setting Cutting Blade of Net Tying Device
Pos: 52.23 /WH B/Warnhinweise - Allgemei ngültig/WARNUN G - Verl etzungsgefahr durch scharfe M esser an der Messer kassette @ 342\mod_1432879717164_78.docx @ 2591855 @ @ 1
WARNING! - Risk of injury from sharp blades
When working on the blade cassette, persons could get hurt by the blades.
• Never touch the blades of the blade cassette with bare hands.
• Always wear protective gloves when working on the blade cassette.
Pos: 52.24 /BA/War tung/Rundballenpresse/Einstell ung Schneidmesser N etzwickel einrichtung @ 34\mod_1256118782238_78.docx @ 326151 @ @ 1
16.4.1
Adjusting the cutting blades of the net wrap system
RP-B-003
2
3
4
1
a=2mm
5
b=8mm
6
Fig. 224
If the blade bar stop (1) is resting against the stop (2), there should be a gap of
a = approx. 2
mm
from the spring rail (3) to the bearing tube (4) or
b = 8 mm
from the bearing (6) to the
bearing tube (4).
Adjusting procedure:
• Loosen screw (5).
• Move until dimension a = 2 mm.
• Tighten the screw (5).
Pos: 52.25 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
