Operation
214
Make the adjustment of the blade control shaft
(1) using the oblong holes
:
CP100094
2
4
1
2
2
3
Fig. 163
1. Release counter nuts (3) on both sides and readjust blade control shaft (1) with the
adjusting screws (4) to the cutting rotor.
Make the adjustment identical on both sides.
2. On both sides of the machine, tighten fastening bolts (2) of the bearing case.
3. Initialize the blade control shaft again when using
new blades
.
Pos: 48.43 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
