Krone BiG X 1000 Original Operating Instructions Download Page 83

Page: 83 / 120

IV - 17

Info Centre

BX500019

BX500020

4.6.2.2 Setting the maize header working width

• You can use the rotary potentiometer to select the

setting for the number of rows. The input field is
highlighted in colour.

• Pressing the rotary potentiometer allows you to

jump to the input field.

• Use the rotary potentiometer to adjust the desired

number of rows.

• To exit the input field again, press the rotary

potentiometer.

• You can use the rotary potentiometer to select the

setting for the spacing between rows. The input field
is highlighted in colour.

• Pressing the rotary potentiometer allows you to

jump to the input field.

• You can use the rotary potentiometer to adjust the

desired spacing between rows.

• To exit the input field again, press the rotary

potentiometer.

• Activating the

key brings up the basic screen.

• To open the settings for AutoScan, press the

key.

• Pressing the

key on the rotary potentiometer

takes you one menu level back.

The resulting working width is
calculated directly from the row
spacing and the number of rows and
the result is displayed.

BX500166

To set the machine type:

• You can use the rotary potentiometer to select the

setting for the machine type. The selection box is
highlighted in colour.

• Pressing the rotary potentiometer allows you to

jump to the selection box.

• Use the rotary potentiometer to adjust the machine type.
• Pressing the rotary potentiometer causes the

setting to be applied and returns you from the
selection box.

• Activating the

key brings up the basic screen.

• To open the settings for AutoScan, press the

key.

• Pressing the

key on the rotary potentiometer

takes you one menu level back.

https://tractormanualz.com

Summary of Contents for BiG X 1000

























































































































Search results

Summary of Contents for BiG X 1000

Reviews:

Krone BiG X 1000, Original Operating Instructions, Page: 83 / 120

Search results

Summary of Contents for BiG X 1000

Reviews: