Krone BiG X 1000 Original Operating Instructions Download Page 102

Page: 102 / 120

Info Centre

IV - 36

4.7.6 Menu 1-7 „Display“

The main menu „Settings“ is active.

• Select menu 1-7 „Display“ with the rotary

potentiometer.

• Press the rotary potentiometer.

The display shows menu level 1-7 „Display“.

The "Display" menu is divided into three sub-menus:

•

= Menu 1-7-1 "Contrast/brightness"

•

= Menu 1-7-2 „Beeper“

•

= menu 1-7-4 „Direction of Rotation“

• Pressing the

key on the rotary potentiometer

takes you one menu level back.

4.7.5 Menu 1-5 „Language“

The main menu „Settings“ is active.

• Select menu 1- 5„Language“ with the rotary

potentiometer.

• Press the rotary potentiometer.

The display shows the language selection.

Set language

(1)

= currently set language

(2)

= display of the selected language

• You can select the language you want with the

rotary potentiometer.

• To confirm the selection, press the rotary

potentiometer.

• Pressing the

key on the rotary potentiometer

takes you one menu level back.

The selected language is applied
immediately.

BX500035

1-5

BX500036_2

BX500037_1

https://tractormanualz.com

Summary of Contents for BiG X 1000

























































































































Search results

Summary of Contents for BiG X 1000

Reviews:

Krone BiG X 1000, Original Operating Instructions, Page: 102 / 120

Search results

Summary of Contents for BiG X 1000

Reviews: