IV - 7
Info Centre
4.2.3 Temporary Change of the Maize
Header Working Width
The resulting working width is
calculated from the row distance and
the number of rows directly and the
result is displayed.
• Pressing the
1
key decreases the number of
rows; if the
1
key is held down for a longer time,
the number decreases faster.
• Pressing the
2
key increases the number of rows
(up to the maximum for the fixed set number). If the
2
key is held down for a longer time, the number
will increase faster.
It is also possible to make a setting with the rotary
potentiometer:
• You can use the rotary potentiometer to select the
setting for the working width. The input field is
highlighted in colour.
• Pressing the rotary potentiometer allows you to
jump to the input field.
• You can adjust the desired number of rows with the
rotary potentiometer (up to a maximum for the fixed
set number).
• To exit the input field again, press the rotary
potentiometer.
Activating the key on the multifunction
lever ((7) = raise lifting gear up to top)
causes the system to switch back to
the permanently set working width.
1
2
3
4
5
6
7
8
A
B
C
D
BX500009_1
II
III
V
I
7
BX500500
https://tractormanualz.com