Info Centre
IV - 50
1
2
3
4
5
6
7
8
A
B
C
D
BX500055
Lifting gear
• The current lifting height is indicated as a % with
the
symbol.
• The currently saved absolute height of the lifting
gear at 80 % is indicated by the symbol
.
• The currently saved absolute height of the lifting
gear at 20 % is indicated by the symbol
.
Pendulum frame
• The saved digital value for maximum deviation is
indicated by the symbol
; the digital value
for the pendulum frame by the symbol
.
The digital value for the pendulum frame is updated
during the calibration process.
• The current value of the sensor is indicated as a
digital value with the symbol
for pendulum
frame.
Calibration process for the pendulum frame
Prerequisites
• Field mode release switch turned on.
• Front attachment unit connected.
• The front attachment (with the maize header folded
out) must be standing on the ground with a solid
subsurface
•
Lower the lifting gear until the front attachment
comes to rest on the ground.
• If the front attachment is not horizontal to the
machine, align the pendulum frame exactly with the
pendulum frame left (1) or pendulum frame right (2)
keys.
•
To start calibration, activate the
D
key under
softkey
= „Apply setpoint value“. The
display on the softkey switches to
=
„Calibration process running“ and
= „Calibration
process successfully completed“.
The saved digital value for the pendulum frame
is updated.
1
1
1
1
1
2
BX500097_1
https://tractormanualz.com