manualshive.com logo in svg

Krone BiG X 1000, Original Operating Instructions, Page: 52 / 120

Share
Download
Krone BiG X 1000 Original Operating Instructions Download Page 52

III - 4

Operators controls

3.2.5 Release switch – travelling gear

When the travelling gear release switch (1) is actuated,
the travelling gear is released.

No persons may be present in the
direct hazardous area of the machine
when the travelling gear release switch
is actuated!

Always remove the ignition key when
leaving the driver’s cab. To switch off
the forage harvester, actuate the
holding brake switch and set the
travelling gear switch (1) to the off
position (I).

I

-

Travelling gear off

II

-

Travelling gear on

When the travelling gear is switched on (

 II

 position ),

the maintenance functions (manual operation on the
left platform) are not released.

3.2.6 Release switch – all-wheel drive

Actuating the all-wheel drive release switch (1)
connects all-wheel drive.

• The road/field release switch must be set to field

operation.

• The travelling gear release switch (2) must be

switched on (

 II

) and the forage harvester must be

at a standstill.

I

-

All-wheel drive switched off

II

-

All-wheel drive switched on

3.2.7 Axle separation key

Actuating the axle separation key switches axle
separation on or off.

• The all-wheel drive release switch (2) must be

switched on; the drive speed must be below 10 km/h.

• Actuate axle separation key (1) – axle separation

switched on.

• Actuate axle separation key (1) again – axle

separation switched off.

When all-wheel drive is switched off, axle separation is
also switched off.

1

BX100150

I

II

2

BX100160

1

I

II

II

2

BX100161

1

https://tractormanualz.com

Summary of Contents for BiG X 1000

























































































































Reviews:

No comments