manualshive.com logo in svg

Krone BiG X 1000, Original Operating Instructions, Page: 75 / 120

Share
Download
Krone BiG X 1000 Original Operating Instructions Download Page 75

IV - 9

Info Centre

4.3 Front Attachment

During field mode, if the feed drive/front attachment
release switch is turned on, the current actual speed
and the set setpoint speed of the front attachment are
shown in the Settings (IV) info area in the Front
attachment menu field.

4.3.1 Status (1)

•

= Front attachment standstill

•

= front attachment not OK

•

= front attachment OK

•

= Front attachment forward inactive

•

= Front attachment forward active

•

= Front attachment reverse inactive

•

= Front attachment reverse active

4.3.2 Foreign object detection (2)

•

= Metal detection deactivated

•

= metal detected in feed drive

•

= An error has occurred in metal detection.

RockProtect

•  

= A rock was detected in the feed drive.

•  

= An error has occurred in RockProtect.

•  

= An error has occurred in metal detection

and RockProtect.

1

2

3

4

5

6

7

8

A

B

C

D

BX500006_2

II

III

V

I

2

1

3

4

https://tractormanualz.com

Summary of Contents for BiG X 1000

























































































































Reviews:

No comments