manualshive.com logo in svg

Krone BiG X 1000, Original Operating Instructions, Page: 51 / 120

Share
Download
Krone BiG X 1000 Original Operating Instructions Download Page 51

III - 3

Operators controls

3.2.2 Release switch – road/field

When travelling on roads, the road/
field release switch must be set to the
position "I".
This ensures that only the travelling
gear, the steering mechanism and the
brakes are active.

The road/field release switch (1) is used to switch from
road travel to field operation and vice versa.

I

-

Road travel

II

-

Field operation

3.2.3 Release switch – feed drive/front

attachment

Actuating the feed drive/attachment release switch (1)
releases the feed drive rollers and the corresponding
attachment.

• The road/field release switch (2) must be set to field

operation (

 II

).

I

-

Feed drive/front attachment off

II

-

Feed drive/front attachment on

3.2.4 Release switch – holding brake

Driving for an extended period of time
with the holding brake applied will
result in overheating of the brake.

I

-

Holding brake released

II

-

Holding brake applied

The holding brake is applied automatically when the
ignition is switched off.

1

BX100041

I 

I I 

1

2

BX100050

I

I I 

I I 

1

BX100051

I

I I 

https://tractormanualz.com

Summary of Contents for BiG X 1000

























































































































Reviews:

No comments