IV - 12
Info Centre
4.5 Lifting Gear
In field mode, the current lifting gear control is
displayed in the Drive data info area (II). The actual
height of the lifting gear and the corresponding setpoint
pressure or the setpoint height is displayed in the
Settings info area (IV) in the Lifting gear menu field.
4.5.1 Status
•
= The lifting gear pressure control is
active. The controller regulates the pressure against
the ground to a constant value. Control is active.
•
= The lifting gear pressure control has
been switched on. Control is still inactive.
•
= Lifting gear distance control (optional,
only in conjunction with distance sensors); the
control sets the height constant relative to the
ground. Control is active.
•
= The lifting gear distance control has
been switched on. Control is still inactive.
•
= Lifting gear position control; the control
sets the height constant relative to the machine.
Control is active.
•
= The lifting gear position control has
been switched on. Control is still inactive.
• 1st value (1) = actual height of the lifting gear in
cm or inches
• 2nd Value (2) = setpoint pressure as a percentage
value for the own weight of the front
attachment. It is adjustable between -
6% (front attachment sways above
the ground) to a maximum of 70%
(front attachment presses on to the
ground with 70% of its own weight).
or
2nd value (2) = nominal height in cm or inches or
as a % if the lifting gear distance
control is set.
1
2
3
4
5
6
7
8
A
B
C
D
BX500008_2
II
IV
V
I
2
III
https://tractormanualz.com